SUPERCRITICAL WATER LOOP FOR IN-PILE MATERIALS TESTING
The 5th International Symposium on SuperCritical Water-cooled Reactors - 2011 March 13-16


Presented at:
The 5th International Symposium on SuperCritical Water-cooled Reactors
2011 March 13-16
Location:
Vancouver,Canada
Session Title:
Materials I (General)

Authors:
Mariana Ruzickova (Research Centre Rez Ltd.)
Rudolf Vsolak (Research Centre Rez Ltd.)
Petr Hajek (Research Centre Rez Ltd.)
Marketa Zychova (Research Centre Rez Ltd.)
Rostislav Fukac (Research Centre Rez Ltd.)
  

Abstract

The Supercritical Water Loop (SCWL) has been designed and built within the HPLWR Phase 2 project, with the objective of testing materials under supercritical water conditions and radiation. The design parameters are set to 25MPa and 600°C in the testing area, where material samples shall be located. The loop has recently undergone pressure and leakage tests, during which the strength and tightness of the loop were proved. The loop has been also subjected to the first trial operation at nearly maximum operating parameters (temperature 550°C was reached); loop operation was steady during several days. Presently, loop operation is envisaged in order to test the loop’s long term operation ability. Samples of a material that needs further testing under out- of-pile conditions shall be exposed in the loop; the choice shall be made in agreement with the results of the WP4 – Materials of the HPLWR Phase 2 project.

Individual Conference-Paper Copies (Electronic Where Available):

  • For CNS members, the first 5 copies per calendar year are free, and additional copies are $10 each.
  • For non-members, the price is $25 for the first Conference-paper copy in a request, and $10 each for additional copies of papers in the same conference and in the same request.
  • Contact the CNS office to order reprints.