CORROSION TESTING OF NiCrAl(Y) COATING ALLOYS IN HIGH-TEMPERATURE AND SUPERCRITICAL WATER
The 5th International Symposium on SuperCritical Water-cooled Reactors - 2011 March 13-16


Presented at:
The 5th International Symposium on SuperCritical Water-cooled Reactors
2011 March 13-16
Location:
Vancouver,Canada
Session Title:
Materials V (General II)

Authors:
Stephan Biljan (Carleton University)
Xiao Huang (Carleton University)
Yunfen Qian (Carleton University)
David Guzonas (Atomic Energy of Canada Limited)
  

Abstract

With the development of Generation IV (Gen IV) nuclear power reactors, materials capable of operating in high-temperature and supercritical water environment are essential. This study focuses on the corrosion behavior of five alloys with compositions of Ni20Cr, Ni5Al, Ni50Cr, Ni20Cr5Al and Ni20Cr10AlY above and below the critical point of water. Corrosion tests were conducted at three different pressures, while the temperature was maintained at 460°C, in order to examine the effects of water density on the corrosion. From the preliminary test results, it was found that the binary alloys Ni20Cr and Ni50Cr showed weight loss above the critical point (23.7 MPa and 460°C). The higher Cr content alloy Ni50Cr suffered more weight loss than Ni- 20Cr under the same conditions. Accelerated weight gain was observed above the critical point for the binary alloy Ni5Al. The combination of Cr, Al and Y in Ni20Cr10AlY provides stable scale formation under all testing conditions employed in this study.

Individual Conference-Paper Copies (Electronic Where Available):

  • For CNS members, the first 5 copies per calendar year are free, and additional copies are $10 each.
  • For non-members, the price is $25 for the first Conference-paper copy in a request, and $10 each for additional copies of papers in the same conference and in the same request.
  • Contact the CNS office to order reprints.